The ATP Total loss has been successfully running on skis around the world for 4 years. We thought it was time, after feedback from users to add some extra features to our Total Loss system. But first we wanted to be able to fit the ECU into the OEM electric box before adding any features, this we have now manufactured.
The ATP Total Loss is unrivalled in its quality, reliability and performance tuning capabilities. The new ATP "Flame" Total loss still uses the same tried, tested, proven components and state of the art Flash technology as in our previous system.

We can program your desired or our recommended timing curves or you can purchase the optional extra program lead.  The programming lead enables the user to accurately set timing, RPM and rev limiter, the ECU allows two curves (curve A & curve B) to run entirely separate timings and rev limits. These two curves can be switched between whilst riding with the flick of a switch on your handle bars.
The programming is really quite easy with group edit options and a built in help section.

Features:
- Billet aluminium ECU, installs into the OEM electric box
- Program directly from your laptop to your ECU
- Run 2 separate curves side by side
- ECU has a built in “Sleep Mode” the unit will turn off when no engine movement has been detected. Turns on again upon a signal from engine movement within 2 seconds. Therefore does not require any external switching on or off. No need to worry about drain on the battery, the “Sleep Mode” only consumes 8 milliamps
- Ignition stops on the stop button, no run on
- Uses waterproof connectors
- Uses existing OEM wiring harness and connectors alleviating any installer error problems i.e. bad connections and keeping everything as waterproof as possible.
- No external signs of a Total Loss fitted

Kit Includes:
- Pre programmed (if required) ECU (Brain box) in a sealed Billet aluminium case. The case is black   anodised satin finish and laser engraved.
- Lightweight black anodised flywheel ( 718 grams)
- Stator plate and pick up
- Fitting instructions

Programming lead is an optional extra. If you do not wish to purchase this ATP offer the re-programming of curves free of charge to the original purchaser

Please note: Although we have tried to make the installation as simple as possible it is advised that if you are unsure/don’t feel able to do this then please contact us for advice on your nearest fitting centre (if you are too far to come direct to ATP).

Used by Recreational, Pro and AM Freestylers and Freeriders alike, equally amazing on race skis.
Once ordered we will contact you for your ski spec and/or preffered timing curve if necessary.

Yamaha SJ 96+

Please contact us prior to ordering to discuss your requirements.

Discussions and comments read more (opens new website)